Welcome to visit Nide Corporation official website!
Home > Products >Automatic E Bike Hub Motor Winding Machine

Automatic E Bike Hub Motor Winding Machine

Model number:ND-LN-W02-2
Introduction:This wheel motor winding machine is suitable for E Bike hub motor, electric motorcycles motor, other NEVS

Product video

  • Specification
  • Automatic E Bike Hub Motor Winding Machine

    The automatic wheel hub motor winding machine is used for E Bike hub motor and electric vehicles wheel hub motor manufacturing.

    Adopts two-stations flyer coil winding technology.

    The e bike hub motor are used for bike direct drive hub motors or other NEVs, those wanting a lightweight and silent setup, and those wanting awesome hill climbing torque and regen.They boast maximum efficiency across the entire speed range and a high torque at low speeds.

    1. E Bike Hub Motor Winding Machine Main function:

    The wheel motor stator winding machine has 2 flyer winding stations adopts air cylinder, PLC and touch screen control to realize the main functions of positioning, indexing, flying fork winding, motor cable winding, automatic front thread trimming and other functions. It can store hundreds of parameters and switch arbitrarily.

    2. E Bike Hub Motor Winding Machine Application

    This wheel motor winding machine is suitable for E Bike hub motor, electric motorcycles motor, electric vehicles motor, electric bicycles motor, electric scooter motor, new energy vehicles, etc.

    3. E Bike Hub Motor Winding Machine Technical Parameters

    Product name:Automatic E Bike wheel hub motor stator winding machine
    Stator OD:D200-D300mm(different OD needs to change different tooling)
    Stator stack: 30-85mm (The tooling can be used for stacked stators within 5mm. If the random mold is designed for 30mm, it can be used to 35mm stators, If you make a stator of more than 35mm, you need to redo 2 pieces of guard plates, 2 sets of I-shaped blocks, spare parts)
    Wire dia:0.5-1.0mm
    Winding method: flyer coil winding
    Winding station:2
    Cycle time:winding 0.9X40 turns 54 slots 15 mins.
    Primary qualification rate≥98%(Stator stack thickness error is less than 0.2mm)
    Air pressure: 0.4-07Mpa
    Input voltage: 220V
    Input power: 5KW
    Dimension900X2100X1700 mm

    4. E Bike Hub Motor Winding Machine Picture

    e bike motor winding machine.jpg

    e bike hub motor winding machine.jpg

    e bike wheel hub motor winding machine.jpg

    e bike hub motor coil winding machine.jpg

    5. E Bike Hub Motor Winding Machine Video

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    Contact us

    Motor Parts Department

    Manager: Annie    

    Phone/Whatsapp/Wechat : 0086-13738869026 

    Email : emarketing@nide-group.com;

    Motor Manufacturing Machine Department

    Manager:Herbert Zhang

    Phone/Whatsapp/Wechat : 0086-15067409300

    Email : emarketing@nide-group.com; marketing8@nide-group.com;

    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo 315040, China