This type of stator winding machine can automatically wind the coils into stator slot. The winding can be programed in the touch screen. 

(1) Machine Function and characteristic:

1. Cast iron or steel frame can absorb the shock. Accuracy is stable. The maximum winding speed is up to 450rpm (according to the wire diameter).

2. All the actions are fully automatic (including loading and unloading). The winding could be more stable and efficient.

3. The cutting part structure is in compact. Wire clamping and cutting is finished at the same time.

4. Easily to change the fixture for different types of stators.

5. Fixtures are in cycle operation automatically. It is benefit for the on-line operation.

6. Permanent magnet tensioning device enables the tension adjustment.

7. Travel and swing angle is adjusted within 150-220mm (mechanical adjustment) .It could adapt to different requirement of different stator models.

8. Two working stations

(2) Main technical data:

• Stator O.D：50~90mm

• Wire diameter：0.25~0.8mm

• Stator stack length：20~45mmm(standard);30~60mm(lengthen)

• Stator I.D：30~50

• Slot number：2 poles

• Air pressure：0.4~0.7MPa

• Lubrication mode：Continuous lubrication oiling machine

• Voltage：AC380V,50/60Hz

• Weight：1800Kgs

• Dimension：2100*1250*1830mm

(3)Application:

It is suitable for two poles stator.

About Motor stator manufacturing

Motor stator manufacturing production assembly line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine.NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

About NIDE

Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

Our machine's application

Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

Contact us

Motor Parts Department

Manager： Annie    

Phone/Whatsapp/Wechat : 0086-13738869026 

Email : emarketing@nide-group.com;

Motor Manufacturing Machine Department

Manager：Herbert Zhang

Phone/Whatsapp/Wechat : 0086-15067409300

Email : emarketing@nide-group.com; marketing8@nide-group.com;

Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo 315040, China

SNS