Welcome to visit Nide Corporation official website!
Home > Products >Automatic Compressor motor stator coil winding machine

Automatic Compressor motor stator coil winding machine

Model number:RXL1-160C
Introduction:The motor stator coil winding machine is suitable for the 2poles, 4poles and 6poles motor stator.The action of automatic skipping, automatic wire cutting and automatic indexing can be finished once sequentially.

Product video

  • Specification
  • Automatic Compressor motor Generator stator coil winding machine 

    (1) Machine main function and characteristic

    This stator coil winding machine adopts single head and double winding stations structure automatically.

    It is suitable for the 2poles, 4poles and 6poles motor coils winding.

    The stator winding machine has the function of continuous/discontinuous winding,

    Automatic wind the coil into transfer former orderly;

    The stator coil winder is especially suitable for high slot filling rate, small slot gap stator;

    The action of automatic skipping, automatic wire cutting and automatic indexing can be finished once sequentially;

    The winding parameter could be set in human-machine interface, winding tension is adjustable.The whole set of tooling can be changed, and it takes about 15min. PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction. The working rotation speed can be set .

    Each coil winding machine has one set winding tooling and three vertical winding forms.

    It adopts servo system to rotate and index transfer form. Main spindle is controlled by servo motor. X and Y spindle of wire hooker and wire cutter adopts servo system. Tooling sunk adopts servo system also.

    Allow three wires winding simultaneously.

    The coil turn number accuracy is ±1 turn.

    Machine has no distinct vibration and noise.

    Free of enamel damage and wire snap.

    Once the copper wire is run out, machine will automatically stop.

    It can adjust the length of bridge wire and lead wire.

    stator winding machine 

    (2) Technical Data:

    Wire diameter: 0.17~1.2mm
    Max stack OD: 160mm
    Max stack height:100mm
    Max coil perimeter: 650mm
    Motor poles: 2, 4, 6, 8
    Max coil tap: 260mm
    Winding head: 1pc
    Winding speed: ≤2200RPM
    Max flier track: 400mm
    Transfer number: 2~6section
    Air source:0.5-0.8Mpa
    Voltage:380V 50/60HZ
    Power: 9 kw
    Weight:around 1600kg

    (3) Application

    This coil winding machine is suitable for 2 poles, 4 poles and 6poles motor stator, such as compressor motor ,generator stator and other electric motor with high filling slot stator.

    (4) Picture show

    The stator coil winding machine has two winding stations

    automatic stator winding machine


    (5) The stator winding machine video

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    Contact us

    Motor Parts Department

    Manager: Annie    

    Phone/Whatsapp/Wechat : 0086-13738869026 

    Email : emarketing@nide-group.com;

    Motor Manufacturing Machine Department

    Manager:Herbert Zhang

    Phone/Whatsapp/Wechat : 0086-15067409300

    Email : emarketing@nide-group.com; marketing8@nide-group.com;

    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo 315040, China