中文版
English
electrical insulation material 6641 DMD mylar polyester film paper
Model number:NDPJ-JYZ-6641
Introduction:The 6641 DMD mylar polyester film electrical insulation material is a three-layer composite material made of one layer of polyester film and two electrical polyester fibre nonwovens and glued by F class resin.
- Specification
Introduction
The 6641 DMD mylar polyester film electrical insulation material is a three-layer composite material made of one layer of polyester film and two electrical polyester fibre nonwovens and glued by F class resin. With good mechanical property and electrical property, polyester non-woven fabric has good adsorption capacity and can absorb resin during impregnation.
Application
It is widely used in slot, phase and liner insulating of motors，Interlayer insulation in the transformer. It is also widely used in automatic coil inserting machine for wedge inserting.
Specification
Thickness : 0.13mm-0.50mm
Sheet: 1000*980mm
Coil: maximum width 1000mm
Strip: minimum width 5mm
Thermal class : F
Working temperature: 180 degree
Color: Blue
Normal Bond strength: no delamination
Bond strength at 180±2°C: No delamination, no blister, no adhesive flow
Properties
Unit
Parameter
Insulation paper thickness
MM
0.13
0.15
0.18
0.20
0.23
0.25
0.30
0.35
0.40
0.45
0.50
Thickness deviation
MM
±0.02
±0.02
±0.02
±0.02
±0.02
±0.03
±0.03
±0.04
±0.04
±0.05
±0.05
Grammage and deviation
GSM
130±13
152±15
187±19
205±21
240±24
275±27
322±32
375±38
466±47
536±54
606±61
Film thickness
MM
0.036
0.050
0.075
0.075
0.100
0.125
0.150
0.188
0.250
0.300
0.350
Breakdown voltage
KV
≥5
≥6
≥7
≥7
≥9
≥10
≥12
≥15
≥18
≥20
≥22
Tensile strength (MD
N/CM
≥60
≥90
≥110
≥120
≥140
≥170
≥200
≥270
≥340
≥360
≥390
Tensile strength (TD)
N/CM
≥40
≥80
≥100
≥105
≥120
≥150
≥180
≥200
≥280
≥300
≥320
Package
Inner packaging: polyethylene film
Outer packaging: carton or woven bag
Storage conditions
Can be stored indefinitely under normal conditions (20°C, 50% r.h.)
Picture show
Information needed for insulation material inquiry
It will be better if customer could send us detailed drawing including below information.
1. Insulation material type: insulation paper, wedge, (including DMD,DM, polyester film, PMP,PET,Red Vulcanized Fiber)
2. Insulation material dimension: width, thickness, tolerance.
3. Insulation material thermal class: Class F, Class E, Class B, Class H
4. Insulation material applications
5. Required quantity: normally its weight
6. Other technical requirement.
NIDE can supply different types of insulation materials for stator or armatures, such as insulation paper and wedge with different class degree. DMD Class B/F, DM Class B/F, Polyester film Class E, Red Vulcanized Fiber Class A, NH& NHN, etc
About Motor component and accessories
NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS
