This Rotor production machine is an Automatic Production Line. It can be produced in two different process according to client's requirements.The whole production is of high automation. 

Process 1: 
Shaft press---end field press---commutator press----armature insulation paper inserting---armature winding-commutator welding----wedge inserting---armature testing.

The electric motor production line including: shaft pressing machine, end plate pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutatorhot stacking machine, armature wedge inserting machine and armature testing machine.

Process 2:

Armature insulation paper inserting---armature winding-commutator welding----wedge inserting-- armature testing.

There are three kinds of production line according to different conveyor: S1, S2 and S3.
S1: Support the armature on the armature shaft, this way maybe damage the shaft.
S2: Support the armature on the lamination, it can protect the shaft and has low noise.
S3: Put the armature on a conveyor plate, it can protect the shaft, lower noise and has nice appearance.

Information needed for armature production line inquiry
It will be better if customer could send us detailed drawing including below information.
1. Rotor lamination drawing

2. Rotor assemble drawing

3. Rotor stack drawing

4. Rotor winding diagram drawing: with rotor wire diameter and turn number

5. Commutator drawing

6. Shaft drawing

7.End cover drawing

8. Required residual unbalancing volume and initial unbalancing volume

9 Wedge and insulation paper material

10. Required productivity

11. Other technical requirement

If possible, it will be better if customer can send us samples. 

The Automatic  Rotor automatic production machine working video

About Motor armature manufacturing

Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

About NIDE

Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

Our machine's application

Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

Contact us

Motor Manufacturing Solution

Email : emarketing@nide-group.com; marketing8@nide-group.com;

SNS