Nide produce various kinds of armature or rotor winding machine for different applications. Our armature winding machine has both automatic type and semi-automatic type.  During machine running, armature winding machine can automaticaly wind wire into armature slots. The winding process can be programed in the touch screen.Our machines are suitable for winding small, medium and big wire diameter armature.

(1) Machine function and characteristic

This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding, indexing andwire cutting, only load and unload armature from material loader.

Equipped with touch screen and PLC, winding parameter could be set and modified on the screen.

We also have armature winding machine equipped with conveyor, operatoronly need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. We could produce machine according to customer's armature accordingly.

(2)Technical Parameter:

Wire diameter：Magnetic hysteresis method: 0.16~0.55mm/ Electric control method: 0.30~0.85mm

Armature O.D range：20~60mm

Stack length：20~60mm

Shaft diameter：3~17mm

Shaft length：Less than 300mm

Armature slot：Evenslot

Turn number：0~9999

Commutator diameter：12~40mm

Winding speed：0~3000rpm

Winding motor power：1.5KW* 2

Angle detecting speed：0~3000rpm

Angle detecting motor power：0.75KW*1

Air supply pressure：4~6Kg/cm2

The machine total power：4.0KW

Voltage：Three phase AC380V50/60Hz

Weight：1200Kg

Dimension：2000(length)X1300(width)X1800(height)mm

(3) Application

It is suitable for home appliance, car and power tool motor aramture.