Nide produce various kinds of armature or rotor winding machine for different applications. Our armature winding machine has both automatic type and semi-automatic type. During machine running, armature winding machine can automaticaly wind wire into armature slots. The winding process can be programed in the touch screen.Our machines are suitable for winding small, medium and big wire diameter armature.
(1) Machine function and characteristic
This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding, indexing andwire cutting, only load and unload armature from material loader.
Equipped with touch screen and PLC, winding parameter could be set and modified on the screen.
We also have armature winding machine equipped with conveyor, operatoronly need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. We could produce machine according to customer's armature accordingly.
Wire diameter：Magnetic hysteresis method: 0.16~0.55mm/ Electric control method: 0.30~0.85mm
Armature O.D range：20~60mm
Shaft length：Less than 300mm
Winding motor power：1.5KW* 2
Angle detecting speed：0~3000rpm
Angle detecting motor power：0.75KW*1
Air supply pressure：4~6Kg/cm2
The machine total power：4.0KW
Voltage：Three phase AC380V50/60Hz
It is suitable for home appliance, car and power tool motor aramture.