欢迎访问耐达公司官网网站!
产品中心
首页 > 产品中心 >卧式定子绕组最终成型机

卧式定子绕组最终成型机

型号:Z3XW2-400 / 350
简介:该成型机采用卧式设计,可更好地装载和卸载定子,尤其适用于大型和重型定子。

产品视频

  • 设备参数
  • Horizontal Type Stator Winding Final Forming Machine

    Introduction:This forming machine is designed with a horizontal type to better load and unload stators, especially for the big and heavy stators.

    (1)  Machine mainfunction and characteristic

    This machine is horizontal type so as to easily load and unload stator. It is driven by hydraulic system, and controlled by PLC. It expands the inner of the over-hang during forming process; it effectively ensures the over-hang dimension and the appearance.

    During tooling change, just change the block, inner expansion core and upper stator fixing sleeve. The core adopts quick release structure. For the block and upper stator fixing sleeve, it can be quickly changed by loosening the related screws. When change different stack stator, loosen related screws, then drive the gear and rack by handle. After adjustment, tighten the screws.

    (2) Main technical data

    Stator   OD: ≤φ350mm

    Stator   ID:φ80-φ230mm

    Stack   Height:100mm-400mm

    Displacement of Cylinder:30L/min

    Power supply:380V   50/60Hz

    Weight ≈1800Kg

    Dimension:(L)2550×(W)1930×(H)2200mm

    (3) Application

    It is applied to deep water pump motor and other various type of overlength motor stator.